Without the Late Deliveries, Wrong Prints, or Hidden Costs.
Custom logo dye sub patches put a full-color, detailed brand mark on your gear that keeps showing up every time it's worn. That beats a one-off ad or a printed banner that only runs for a week. A busy or multi-color logo stays sharp on it, so a mixed team keeps a consistent, professional look without reprinting anything each time someone new joins.
You've been handed a logo file and a job to get it made right, and you don't need to already know how a patch gets made to do that. This page explains what dye-sublimation actually is, so you can tell whether your artwork calls for it.
Contact our team or start with the range below.
We can source any product you need, with over 1 million products to choose from. Tell us what you need, and we’ll get back to you, usually within a day.
Source this for me
Ask us anything, we're happy to help!
If your logo has a gradient, a photo, or more colors than a thread count can hold, that points to dye-sublimation.
Dye-sublimation sets the color directly into the polyester face of the patch using heat and pressure. That's different from embroidery, where thread sits on top of the backing, and different from a leather or leatherette patch, where a laser burns the mark into the material. Here the dye becomes part of the fabric itself.
Because the color goes into the fabric rather than being stitched in thread by thread, ten colors cost the same as one on custom logo dye sub patches. A gradient, a photo, or a busy multi-color logo carries no extra cost and no extra production step over a simple one.
The face comes out flat and smooth, with none of the raised thread texture embroidery leaves behind, and it looks the same on every patch.
Dye-sub patches need a white or light polyester face to hold color accurately. A dark or richly colored base mutes or shifts the printed color, since the dye takes its final shade from the fabric sitting underneath it.
If your brand colors have to land exact rather than close, or the patch base has to be dark, that's the one real limit of this method worth knowing before you order.
This is the method for artwork that carries a gradient, a photo, or too many colors for a thread count to hold cleanly.
Gradient sports or team crests keep their fade and shading intact on a dye-sub patch, where a solid-thread crest would flatten the effect into a single tone. Multi-color corporate logos running more than two or three brand colors are a natural fit too, since the extra colors add nothing to the cost.
Event and race patches with a photo or a full-color sponsor lineup hold their detail the same way. So does a photo-realistic mascot or a detailed site mark, the same standard a printed patches custom order needs to meet.
The backing you pick follows how the patch gets used.
Sew-on backing suits anything laundered often or worked in physically, since stitching holds under repeated wash and motion better than an adhesive bond ever will. Customizable iron on patches are the better call for cotton-rich fabric, where a fast heat-press application matters more than long-term wear.
Personalized velcro patches make sense when one piece of gear needs to swap between different patches by role or event, rather than carrying one fixed patch for good. And if your mark is a single flat color or a two-tone wordmark with no gradient, embroidered patches are usually the better fit. A solid mark doesn't need dye-sub's color range, and it typically costs less to set up.
Unlimited color at one price is the capacity no thread can match. A detailed or multi-color logo costs no more to produce than a simple one, which is what makes a dye-sub patch the right call for gradients, faces, and full-color crests read up close on a custom logo dye sub patches order.
Still deciding between methods? If your logo carries fine photographic detail or blended color, dye sub is your default, that is the point of this method. If it is a simple one or two color mark, compare it against embroidered patches first, since thread can be cheaper at that level of simplicity.
Nothing is produced until you approve a digital proof showing the actual color and detail of your patch. A vector file, such as AI, EPS, or PDF, works best, but any standard format is fine, and our team checks and fixes the artwork before your proof comes back. Finished patches go onto Apparel of any kind, and we deliver to any address in Texas and the wider United States. Every order is satisfaction guaranteed.
There's no added cost for extra colors. The dye sets into the fabric instead of being laid down thread by thread, so a ten-color logo costs the same to produce as a one-color logo.
Yes. Dye-sublimation holds fine detail and shading that embroidery thread would flatten into a solid tone, so photographic elements and gradients reproduce accurately.
A dye-sub patch needs a white or light polyester face. A dark base can shift or mute what prints, because the final color takes its cue from the fabric underneath.
A logo with a gradient, a photo, or more than two or three colors is the better fit for dye-sub. A single flat color or a simple two-tone mark usually costs less to set up as an embroidered patch instead.
Minimums start as low as 1 unit on some items, with the exact quantity listed on each product page. Tell us the item you want and we'll confirm it.
